In-situ Oxygen Laser Gas Analyzer

In-situ Oxygen Laser Gas Analyzer

Specifications Specifications Gas Range Resolution Repeatability Linearity Response time Drift O2 0-10%vol(can be customized) 0.1% ≤1%FS ≤1%FS ≤2S ≤±1%FS Warm up 30min Digital output RS232/485 Analog output 4-20mA Power supply DC18-36
NR-LITE-L NR-LITE-L

NR-LITE-L NR-LITE-L

The NR-LITE is a rugged net radiometer manufactured by Kipp & Zonen. Net radiometers measure the energy balance between incoming short-wave and long-wave IR radiation relative to surface reflected short-wave and outgoing long-wave IR radiation. This net rad
CNR2-L CNR2-L

CNR2-L CNR2-L

The CNR2 features a unique design with separate outputs for short-wave (solar) and long-wave (atmospheric and terrestrial) radiation. The CNR2 fits in the Kipp & Zonen product line between the single output NR-LITE and the four-component CNR1. The glass domes a
CNR2-L CNR2-L

CNR2-L CNR2-L

The CNR2 features a unique design with separate outputs for short-wave (solar) and long-wave (atmospheric and terrestrial) radiation. The CNR2 fits in the Kipp & Zonen product line between the single output NR-LITE and the four-component CNR1. The glass domes a
NR01-L NR01-L

NR01-L NR01-L

The NR01 net radiometer is manufactured by Hukseflux for applications requiring research-grade performance. The radiometer measures the energy balance between incoming short-wave and long-wave infrared radiation versus surface-reflected short-wave and outgoing
ST350 ST350

ST350 ST350

The highly accurate ST350 Strain Transducer from Bridge Diagnostics brings great efficiency and reliability to measuring live-load stresses on structures. With minimal surface preparation, you can quickly install the transducer and avoid the tedious and tim
SI-111 SI-111

SI-111 SI-111

The SI-111 (previously known as the IRR-P) is a precision infrared radiometer made by Apogee Instruments that makes continuous measurements in field conditions. The SI-111 is composed of a thermopile, which measures surface temperature, and a thermistor, which
OBS-3+ Turbidity Sensor

OBS-3+ Turbidity Sensor

The OBS-3+ Turbidity Monitor is a submersible probe, part of our OBS® line of products that use a backscatter method to measure turbidity. The OBS-3+ operates in the range of 0 to 4000 NTU. It replaces the OBS3 on our price lists. The OBS-3+ can be used
CS455-L CS455-L

CS455-L CS455-L

Over the years, we’ve offered submersible pressure transducers from various manufacturers for measuring pressure, depth, or level in hydrological applications. We are pleased to announce that we have designed and are now producing our own pressure transducers,
Bubble Water Level Sensors

Bubble Water Level Sensors

CS470 Bubble Water Level Sensor The CS470 uses bubble-sensor technology to measure water level. It has two standard interfaces: SDI-12 and 4-20 mA. It has onboard intelligence that allows it to optimize the pumping of air when measuring, and needs no softwar