Cold Rolled Steel iPad Enclosure Floor Stand with Security Push Latch Lock

Cold Rolled Steel iPad Enclosure Floor Stand with Security Push Latch Lock

TSK2011-IPAD Key Features and Specifications: - ADA compliance,simple yet stylish design - It features a key locking,theft-resistant and tamper-proof iPAD enclosure - The enclosure is constructed with radio-transparent, heavy-duty cold-rolled steel with
Hi-Fi Audio Extender Over Cat5e/6

Hi-Fi Audio Extender Over Cat5e/6

Features & Benefits ※ 1-CH Stereo HI-FI Audio Long Distance Transmission ※ Stereo Audio up to 3250ft(1000m) Via Cat5e/6 ※Full ground-loop immunity in Audio ※Built in TVS for surge protection ※20 Hz to 20 KHz bandwidth ※Quickly moves ,adds ,and changes
Analog Hi-Fi Audio Extender up to 3,280ft

Analog Hi-Fi Audio Extender up to 3,280ft

Features & Benefits ※ 1-CH Stereo HI-FI Audio Long Distance Transmission ※ Stereo Audio up to 3250ft(1000m) Via Cat5e/6 ※Full ground-loop immunity in Audio ※Built in TVS for surge protection ※20 Hz to 20 KHz bandwidth ※Quickly moves ,adds ,and changes
1-CH Composite Video/Stereo Audio Transmission via Cat5e/6

1-CH Composite Video/Stereo Audio Transmission via Cat5e/6

Features & Benefits ※1-CH Composite Video/Audio Transmission ※Composite Video Up to 1000 feet (305m) via Cat5e/6 ※Stereo Hi-Fi Audio Up to 3250 ft 1,000m) via Cat5e/6 ※Built-in TVS Protection ※No power Required ※Quickly moves ,adds ,and changes Overview
Hotsale Cold Rolled Steel IPAD Enclosure

Hotsale Cold Rolled Steel IPAD Enclosure

TSK2011-IPAD-EN Key Features and Specifications: - It features a key locking,theft-resistant and tamper-proof iPAD enclosure - The enclosure is constructed with radio-transparent, heavy-duty cold rolled steel with paint finish - All Wi-Fi, Bluetooth and
copper clad steel wire

copper clad steel wire

Copper bonded ground rod is mainly used in the grounding device. Due to its good conductivity, corrosion resistance, tensile strength, etc
PCB Depanelizer With PCB Separator

PCB Depanelizer With PCB Separator

Directions 1, With unique cutting method , the circuit board is cut by six blades . It is a group composed of one upper and one lower blade , and is also a cutting unit. There are A, B, C, three groups. The whole cutting process is divided into three
PCB Separator With Motorized PCB Depanelizer

PCB Separator With Motorized PCB Depanelizer

Directions 1, With unique cutting method , the circuit board is cut by six blades . It is a group composed of one upper and one lower blade , and is also a cutting unit. There are A, B, C, three groups. The whole cutting process is divided into three
50W,80W,100W High Bay LED Lights

50W,80W,100W High Bay LED Lights

With touched recliner,wifi/blue tooth speaker/LED lights/coffee table /storage Packing
25W,30W,40W Integrated LED Solar Lights

25W,30W,40W Integrated LED Solar Lights

With touched recliner,wifi/blue tooth speaker/LED lights/coffee table /storage Packing