KCB-200 gear pump

China

Jan 5, 2017

gear pump, KCB gear pump, KCB-200,

Description

 KCB-200 gear pump

Use
KCB-200 gear pump for conveying solid particles and fibers , non-corrosive, temperature no higher than 120 ℃, the viscosity of 5 × 10-6 ~ 1.5 × 10-3m2 / s (5-1500cSt) oil or nature similar to other liquid lubricants .
KCB-200 gear pump Applications
can be used in the oil transfer system, booster pump ;
in the fuel system can be used as transport , pressure, fuel injection pump ;
In the hydraulic system used to provide hydraulic power pumps ;
KCB gear pump in all industrial areas , can make oil pump ;
structural features
KCB series gear pumps The are gear , shaft, pump , valve , shaft seal formed . Heat treated gears have high hardness and strength , together with the operating shaft mounted in a replaceable bushings. The KCB gear pump lubrication of all parts of the media are using the output automatically when the pump is working to achieve .
There are well-designed pump and back to the tank drain , gear to withstand the torque force at work a minimum , thus bearing loads of small, wear , high KCB gear pump efficiency.
KCB gear pump has overload protection as a safety valve , pressure relief valve of total reflux pump pressure of 1.5 times the nominal exclusion , KCB gear pump discharge can also be adjusted according to actual need for additional pressure within the allowable range . But note that this safety valve relief valve can not be long-term work , when necessary, be installed in the pipeline .
Overhang from the spindle end to the pump to see , for the clockwise rotation.